s

334-673-7223

Archive for 3D

Thunder Tiger – 3D Sukhoi EP

Posted by: rcfunhobbies | Comments (0)
Thursday, July 1st, 2010

RC Fun Hobbies presents (for more info click here)

ttr4347-450

 

A proven 3D fun flyer… easily does any aerobatic and 3D maneuvers.

Created with Anti-Impact EPP material, reducing damage in case of impact. Pocket design fuselage for ease of maintenance. Experience the 3D flying, indoor or out…

Features

  • Made of Anti-impact EPP material
  • Factory pre-painted Team Scheme
  • Pocket design fuselageAccesories Needed
    • Radio Set – Transmitter (3 channels), x3 micro servos, Mini-Receiver
    • Propulsion System – 25A Electronic Motor Controller (Speed Control) for x3 channel radio,
      3 Li-poly cell 1,050 battery, Li-poly charger. (Outdoor Motor: TTR2355 / Indoor Motor: TTR2357)
    • Tools – Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers, Mixing sticks for Epoxy, Scissors,Rubbing alcohol, Paper towels.

    Specification:
     Wing Span: 29.3″ / 830 mm
     Wing Area: 322.4 sq. in. / 20.8 dm2
     Length: 29.8″ / 845mm
     Weight: 14~15 oz. / 420~430 g.

    Need Parts? Give us a call. (334) 673-7223

    • Categories : Featured Products
    Comments (0)

    Rehobeth RC Flying Club Rules

    Posted by: rcfunhobbies | Comments (0)
    Tuesday, May 18th, 2010

    Rehobeth RC Flying Club

    7702 County Rd 203

    Rehobeth, AL 36301

    www.rcfunhobbies.com

    (334) 673-7223

    Welcome to the Club, we hope you enjoy your time with us.

     Just a few rules to abide by at the field:

     

    • No reckless or unsafe flying allowed. Be aware of your surroundings and other aircraft.
    • No flying over housing except for landing approaches.
    • No flying directly over flight line, people, or cars.
    • A club instructor or host member must check out new aircraft before its initial flight. This check out is to include a standard range check.
    • It is the responsibility of each pilot to ensure that his aircraft is airworthy.
    • Frequency pin must be attached to frequency board before turning on transmitter. No transmitters on in parking area and only turned on in designated flight positions and after your frequency has been declared.
    • Student pilots are not permitted to fly by themselves until certified by a club instructor. A club pilot must accompany the new member or guest pilot for the first few flights or until such time as the pilot is deemed safe to fly solo.
    • Each club member shall be limited to one (1) guest pilot per day and must be present during all guest flights.
    • Spectators and non-flying guests are required to remain behind the flight line fence during all flying activity.
    • Field cleanliness is everyone’s responsibility! The pit area must be policed for garbage (I.e. Towels, rubber bands, broken propellers, etc.) before leaving.
    • All takeoffs and landings will depend on wind direction.  Always takeoff and land into the previaling winds.
    • In the event of a crash, every pilot is responsible for damages to property whether it is club, spectator, or any other property not owned by the pilot.
    • Safety is the sole responsibility of each pilot.
    • Club membership fee is $60.00 per year or $30.00 for six months.

    I have read the above rules, regulations, and procedures and agree to comply with them.
     
    Print Name:____________________________ 

     Sign Name:____________________________     

    E-mail:___________________________
     
    Date:________________

    Categories : RULES
    Comments (0)

    Ultra-Micro 4-Site BNF by E-flite

    Posted by: rcfunhobbies | Comments (1)
    Tuesday, February 2nd, 2010

    efl90804siteOur  Price $169.99

    RC Fun Hobbies presents the Ultra-Micro Biplane in a bind N fly version by E-flite. Fly in your backyard or in a gym. A great way to practice your 3D moves anytime.

    Key Features

    • Completely built and flight-ready – just bind to any DSM2™ aircraft transmitter with dual rates and expo
    • Includes two 150mAh Li-Po flight batteries and E-flite’s Celectra™ 4-port charger and AC adapter
    • Features Spektrum’s new AR6400L Long Throw ultra micro receiver/ESC and servos
    • Opitional speed brakes included
    • Unique stamped, preprinted foam construction
    • Carbon fiber bracing and pushrods
    • High-power 8.5 coreless brushed motor and 130mm x 70mm prop installed

    Overview

    The 4-Site™ Bind-N-Fly® Ultra Micro Flyer from E-flite is designed to give experienced 3D pilots, who already have a Spektrum™ or JR® 2.4GHz DSM2™ system, a thoroughly-capable 3D machine that can be flown at the local gym.

    The “secret” behind the Ultra-Micro 4-Site’s awesome 3D-capabilities is a unique manufacturing technique that results in foam wing, fuselage and tail parts that are actually lighter, stiffer and more durable than standard sheet foam. It also gives the wing an airfoil shape that provides superior flight performance to standard sheet foam.These parts are further reinforced with carbon rod and foam bracing that minimizes in-flight flexing and twisting. This exceptionally robust construction, combined with the performance of independent aileron servos, gives the 4-Site a level of control and responsiveness any 3D foamie expert will love.

    The 4-Site BNF comes completely assembled with a Spektrum AR6400L Ultra Micro DSM2 Receiver/ESC/Servo unit that features two built-in linear long-throw servos for the elevator and rudder. This along with the two independent long-throw Spektrum AS2000L Ultra Micro servos on the ailerons provide great performance. Also included are two 1S 3.7V 150mAh Li-Po battery packs as well as E-flite’s Celectra 4-Port Li-Po charger and AC adapter that allows you to charge up to four 1S Li-Po packs at once.

    efl90804site2

    Categories : Featured Products
    Comments (1)

    T-REX 450 Pro Super Combo By Align Corp

    Posted by: rcfunhobbies | Comments (0)
    Friday, January 22nd, 2010

     kx015074t-rex-kit

    USD$595.99                                                                                                                                                                                                                                                                                                                                                                                  Our price $499.99

    RC Fun Hobbies has the best in Heli 3D like this great flying electric 450 size helicopter. You simply have not flown a 3D heli until you’ve flown an Align T-rex 450. For more info on this heli call the hobby shop located in Rehobeth, Al in the Dothan area at 334-673-7223.

    Instructions: Specification:
    Features
    ●Newly designed head block with high rigidity and stability.
    ●Single piece integrated design of main bearing block and servo mount.
    ●Single piece integrated design of anti-rotation guide and gyro mount.
    ●Single piece integrated landing gear.
    ●Highly stable flybar control system.
    ●High precision bearing mixing arms.
    ●Newly designed high resolution swashplate.
    ●Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane.
    ●Highly rigid frame with single piece carbon side and bottom plates.
    ●Highly efficient shaft driven tail design.
    ●Weighted tail rotor blade grips to repel centripetal forces.
    ●Straight-up in-frame rudder servo mount for improved geometry.
    ●Newly designed aerodynamic canopy.
    ●Newly designed high torque motor.
    ●Newly designed high strength main blade grips.＊GP750 indicate status LED and setting    		 ●Length: 635mm
    ●Height: 230mm
    ●Main Rotor Diameter: 710mm
    ●Tail Rotor Diameter: 158mm
    ●Motor Drive Gear: 14T
    ●Main Drive Gear: 150T
    ●Autorotation Tail Drive Gear: 106T
    ●Tail Drive Gear: 25T
    ●Drive Gear Ratio: 1:11.5:4.24
    ●Weight(w/o power system): 450g
    ●Flying Weight: Approx. 780g
    ●Color carton:27.3×10x6.6cm
    ●Outer carton:56×31x28cm ,24sets/ctn
    Accessories:
    ●T-REX 450 PRO Kit Set X1 set
    ●325 Carbon blades X1set
    ●RCE-BL35X 35A Brushless ESC X1
    ●450M Brushless motor(3500KV) X1
    ●DS410M (Metal Gear)Digital servoX3
    ●GP750 Head lock gyroX1
    ●DS520 Digital servoX1Radio transmitter and electronic equipment required for assembly:
    1.Transmitter(6-channel or more,helicopter system)
    2.Receiver(6-channel or more)
    3.Pitch gaugeX1
    4.11.1V 3S Li-Po 2000~2300mAh batteryX1

     kx0150734t-rex450head

    kx0150734t-rex450

    Categories : Featured Products
    Comments (0)

    Gallery

    kx0150734t-rex450head ttr4347-450 rockets-021 rockets-016 off-road-1-23-10-2 winnernov072009-002