Archive for Heli
Blade SR RTF Electric Micro Heli by E-flite
Posted by: | Comments
RC Fun Hobbies presents the Blade SR
Key Features
- Brushless main motor
- A great 2nd heli for anyone who has flown a coaxial or single-rotor fixed-pitch heli
- Softer control response around center for transitioning pilots
- Includes 6-channel HP6DSM 2.4GHz DSM2™ transmitter
- Includes DC Li-Po balancing charger with AC adapter
- Includes 3S 11.1V 1000mAh Li-Po battery pack
- Spektrum AR6100e Microlite Receiver, installed
- E-flite G110 Heading Lock Gyro, installed
- Direct drive tail motor
- Sturdy, shock absorbent two-piece main frame
- Full line of replacement and option parts available
- 100% factory-assembled, test-flown and ready-to-fly
Overview
If you’re ready to step up from a coaxial or single-rotor fixed-pitch heli, the Blade® SR is the absolute best way to make that transition a successful one.
It comes out of the box programmed to provide softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional CP helis. Plus, it’s big enough to fly outdoors even if there’s a little wind.
Needed to Complete
Nothing—everything is included to get flying right out of the box.
We recommend beginners also purchase the Heli Training Gear (Item EFLH1527)
T-REX 450 Pro Super Combo By Align Corp
Posted by: | Comments 
USD$595.99 Our price $499.99
RC Fun Hobbies has the best in Heli 3D like this great flying electric 450 size helicopter. You simply have not flown a 3D heli until you’ve flown an Align T-rex 450. For more info on this heli call the hobby shop located in Rehobeth, Al in the Dothan area at 334-673-7223.
| Instructions: | Specification: | ||
| Features ●Newly designed head block with high rigidity and stability. ●Single piece integrated design of main bearing block and servo mount. ●Single piece integrated design of anti-rotation guide and gyro mount. ●Single piece integrated landing gear. ●Highly stable flybar control system. ●High precision bearing mixing arms. ●Newly designed high resolution swashplate. ●Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane. ●Highly rigid frame with single piece carbon side and bottom plates. ●Highly efficient shaft driven tail design. ●Weighted tail rotor blade grips to repel centripetal forces. ●Straight-up in-frame rudder servo mount for improved geometry. ●Newly designed aerodynamic canopy. ●Newly designed high torque motor. ●Newly designed high strength main blade grips.＊GP750 indicate status LED and setting |
●Length: 635mm ●Height: 230mm ●Main Rotor Diameter: 710mm ●Tail Rotor Diameter: 158mm ●Motor Drive Gear: 14T ●Main Drive Gear: 150T ●Autorotation Tail Drive Gear: 106T ●Tail Drive Gear: 25T ●Drive Gear Ratio: 1:11.5:4.24 ●Weight(w/o power system): 450g ●Flying Weight: Approx. 780g ●Color carton:27.3×10x6.6cm ●Outer carton:56×31x28cm ,24sets/ctn |
||
| Accessories: | |||
| ●T-REX 450 PRO Kit Set X1 set ●325 Carbon blades X1set ●RCE-BL35X 35A Brushless ESC X1 ●450M Brushless motor(3500KV) X1 ●DS410M (Metal Gear)Digital servoX3 ●GP750 Head lock gyroX1 ●DS520 Digital servoX1Radio transmitter and electronic equipment required for assembly: 1.Transmitter(6-channel or more,helicopter system) 2.Receiver(6-channel or more) 3.Pitch gaugeX1 4.11.1V 3S Li-Po 2000~2300mAh batteryX1 |
